Resetting the Wi-Fi Connection on Your ABIS Smart Clothes Airer

If you need to reset the Wi-Fi connection on your ABIS Smart Clothes Airer due to a network change or connection issues, the process is simple. Resetting the Wi-Fi connection will allow you to reconnect the airer to a new Wi-Fi network through the Smart Life app.

Step 1: Prepare the Airer for Wi-Fi Reset

1. Ensure the airer is powered on by plugging it into a power outlet and checking the indicator light.
2. Locate the Sync Button on your ABIS Smart Clothes Airer.

Step 2: Enter Pairing Mode to Reset the Wi-Fi

1. Press and hold the Sync Button on the airer for about 5–10 seconds until the indicator light starts blinking rapidly.
   • This blinking indicates that the airer has entered pairing mode, which resets the current Wi-Fi connection and prepares the device for a new connection.

Step 3: Open the Smart Life App

1. On your smartphone, open the Smart Life app.
2. If your airer is still listed in the app, you may want to delete the old connection by navigating to the device, tapping the three dots (···), and selecting Remove Device.
   • This clears the old Wi-Fi settings and allows you to set up the device as if it’s new.

Step 4: Add the ABIS Smart Clothes Airer to the New Wi-Fi

1. Tap the “+” (plus) icon in the top-right corner of the Smart Life app to add a new device.
2. Select Small Home Appliances, then choose Socket (Wi-Fi) or a similar device type.
3. Follow the prompts to confirm that the indicator light is blinking, which indicates the device is in pairing mode.

Step 5: Connect to Your New Wi-Fi Network

1. When prompted by the app, select your 2.4GHz Wi-Fi network (the ABIS Smart Clothes Airer only supports 2.4GHz, not 5GHz).
2. Enter your Wi-Fi password and tap Next to begin the connection process.
3. The Smart Life app will search for the airer and connect it to the new Wi-Fi network. This process may take up to a minute.

Step 6: Confirm the Connection

1. Once the airer is successfully connected to the new Wi-Fi network, the app will display a confirmation screen.
2. You can rename the device (if necessary) and tap Done to complete the setup.

Step 7: Test the Connection

1. On the Smart Life app, use the On/Off button to test whether the airer responds to commands.
2. If the airer responds, the Wi-Fi reset and reconnection were successful, and you can now control it using the new network.

Troubleshooting Wi-Fi Reset Issues

• Light not blinking: Ensure you press and hold the sync button for the correct amount of time (5–10 seconds) until the light blinks rapidly. If it doesn’t work, try holding the button for a little longer.
• Unable to find the device: Make sure your phone is connected to the 2.4GHz Wi-Fi network. The airer won’t connect to a 5GHz network.
• Wi-Fi password error: Double-check the Wi-Fi password you’re entering in the app. Even a small mistake can prevent the device from connecting.
• Connection takes too long: Move closer to the router to ensure a strong signal during the pairing process.

You’re Ready to Reconnect!

By following these steps, you can easily reset the Wi-Fi connection on your ABIS Smart Clothes Airer and reconnect it to a new network. This ensures that your smart airer can always be controlled from anywhere using the Smart Life app.