Smart Airer User Guide

A Step-by-Step Guide to Connecting Your ABIS Smart Clothes Airer to Wi-Fi

Connecting your ABIS Smart Clothes Airer to Wi-Fi is a simple process, and it allows you to control your airer remotely using the Smart Life app. Follow the steps below to get your smart airer connected in just a few minutes.

Step 1: Check Your Wi-Fi Network

Before starting, make sure your home Wi-Fi is a 2.4GHz network. The ABIS Smart Clothes Airer doesn’t support 5GHz networks, so confirm that your phone is connected to the 2.4GHz band of your Wi-Fi.

  • If your router broadcasts both 2.4GHz and 5GHz, switch your phone to the 2.4GHz network in your Wi-Fi settings.

Step 2: Download and Open the Smart Life App

  1. On your smartphone, go to the App Store (for iPhone) or Google Play Store (for Android).
  2. Search for Smart Life and download the app.
  3. After installation, open the app and log in. If you don’t have an account yet, create one by tapping Sign Up.

Step 3: Prepare the ABIS Smart Clothes Airer for Pairing

  1. Plug in the ABIS Smart Clothes Airer to a power outlet.
  2. Press and hold the Sync Button on the airer for about 5 seconds until the indicator light starts blinking rapidly.
    • The blinking light means the airer is now in pairing mode and ready to connect to your Wi-Fi.

Step 4: Add the Airer in the Smart Life App

  1. Open the Smart Life app on your smartphone.
  2. Tap the “+” (plus) icon in the upper right corner of the home screen to add a new device.
  3. From the category list, select Small Home Appliances, then choose Socket (Wi-Fi) or a similar device type.
  4. The app will ask if the indicator light on your airer is blinking. Tap Confirm to proceed.

Step 5: Connect to Wi-Fi

  1. The app will prompt you to connect your airer to Wi-Fi. Enter your Wi-Fi password for your 2.4GHz network.
    • Important: Ensure your phone is connected to the same 2.4GHz Wi-Fi network that you are pairing with.
  2. The Smart Life app will now search for the airer and begin the pairing process. This can take up to a minute, so be patient.

Step 6: Confirm the Connection

  1. Once the connection is successful, the app will show a confirmation screen.
  2. You can rename your airer (e.g., “Smart Clothes Airer” or “Laundry Airer”) to make it easier to identify in your app.
  3. Tap Done to finish the setup.

Step 7: Test the Wi-Fi Connection

  1. After pairing, you will see the control screen for your ABIS Smart Clothes Airer.
  2. Test the connection by tapping the On/Off button in the app to ensure the airer responds.
  3. If the airer responds correctly, your setup is complete!

Troubleshooting Tips for Wi-Fi Connection Issues

  • Ensure your phone is on a 2.4GHz Wi-Fi network: Many home routers offer both 2.4GHz and 5GHz networks. The ABIS Smart Clothes Airer only connects to 2.4GHz, so double-check your phone is connected to that network.
  • Distance from the router: If the airer is too far from the router, the signal may be weak. Try moving the airer closer to the router for a stronger connection.
  • Reset the airer: If you have trouble connecting, you can reset the airer by holding the sync button for 5–10 seconds until the light starts blinking again. Then, repeat the pairing process.

You’re All Set!

Once your ABIS Smart Clothes Airer is connected to Wi-Fi, you’ll be able to control it from anywhere using the Smart Life app, schedule drying times, and even automate it to fit your routine. Enjoy the convenience of smart drying!